NSN 5306-01-199-2186
Coaxial Connector
Between 2.474 inches and 2.504 inches fastener length, spline extended washer head style, between 0.327 inches and 0.347 inches head height, width between flats: between 0.448 inches and 0.455 inches .
Manufacturer part number S343-6-30 for national stock number 5306011992186.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-199-2186.
-
MPN or Model
S343-6-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.589 inches and 0.639 inches -
Fastener Length
Between 2.474 inches and 2.504 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Width Between Flats
Between 0.448 inches and 0.455 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-055-1145 MPN BACB30LU3-18Close Tolerance Screw
- 5305-01-205-9164 MPN BACB30LU8-21XShoulder Screw
- 5306-00-345-2022 MPN STSBG004A04U024Shear Bolt
- 5306-01-058-4624 MPN VFK101G4-007Shear Bolt
- 5306-01-116-4391 MPN VAL23044-4Internally Relieved Body Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-197-9416 MPN VFK600-5D18Shear Bolt
- 5306-01-352-6397 MPN VCG0016-4D18Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-199-2186 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S343-6-30 | Huck International, Inc. |
VS3190-6-30 | Arconic Global Fasteners & Rings, |
MB156-6-30 | Hi-shear Corporation |
MB156-6-30 | Lisi Aerospace Canada Corp |
VFK600-6-30 | Valley-todeco, Inc. |
AIC763-6-30 | Sps Technologies, Llc |
PBF1267-6-30 | Sps Technologies, Llc |
122897-6-30 | Sps Technologies, Llc |
ST3M753-6-30 | Boeing Company, The |
11829-6-30 | Reid Products Inc. |
MB156-6-30 | Am Multigraphics |
S343-6-30 | Huck Intl Inc |
VS3190-6-30 | Alcoa Global Fasteners, Inc. |