NSN 5306-01-203-0903
Close Tolerance Hex Head Bolt
Between 2.014 inches and 2.044 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0026-0525 for national stock number 5306012030903.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-203-0903.
-
MPN or Model
LD111-0026-0525
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.492 inches -
Fastener Length
Between 2.014 inches and 2.044 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-249-6152 MPN 265-530213-201Aircraft Structural Panel
- 1680-00-376-6200 MPN 159-34408Remote Control Lever
- 5945-00-791-5838 MPN HE455-0008-0001Electromagnetic Relay
- 1560-01-122-1304 MPN 176-43012Aircraft Structural Component Support
- 1560-01-128-0722 MPN 140-31216-4Aircraft Structural Component Fitting
- 4920-01-160-1129 MPN 41A37000-001Pneumatic System Components Test Set
- 1560-01-173-8652 MPN L1700021-004Aircraft Structural Component Bracket
- 5985-01-190-3488 MPN LE413-0229-0041Waveguide Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-203-0903 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0525 | Boeing Company, The |