NSN 5306-01-204-4690
Coaxial Connector
Between 1.120 inches and 1.150 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number VS3133-3-13 for national stock number 5306012044690.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-204-4690.
-
MPN or Model
VS3133-3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 1.120 inches and 1.150 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-212-1987 MPN BACB30LU4P7Close Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5305-01-502-6058 MPN 3M1170C3-7AClose Tolerance Screw
- 5306-00-779-3757 MPN VAL22033-961Shear Bolt
- 5306-01-044-2963 MPN VAL23607-4-4Shoulder Bolt
- 5306-01-044-7467 MPN VAL22034-14FS50Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-204-4690 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3133-3-13 | Arconic Global Fasteners & Rings, |
C7521-3-13 | Lockheed Martin Corporation |
C7521-3-13 | Sps Technologies, Llc |
C7521-3-13 | Valley-todeco, Inc. |
C7521-3-13 | Sps Technologies, Llc |
C7521-3-13 | Sps Technologies, Llc |
C7521-3-13 | Alcoa Global Fasteners, Inc. |
PBF7521-3-13 | Sps Technologies, Llc |
VCG0009-3-13 | Valley-todeco, Inc. |
AIC596-3-13 | Sps Technologies, Llc |
120978-3-13 | Sps Technologies, Llc |
VS3133-3-13 | Alcoa Global Fasteners, Inc. |