NSN 5306-01-209-7950
Close Tolerance Hex Head Bolt
Between 1.627 inches and 1.674 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number VCG0002-3D21 for national stock number 5306012097950.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-209-7950.
-
MPN or Model
VCG0002-3D21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.305 inches and 0.372 inches -
Fastener Length
Between 1.627 inches and 1.674 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches and 0.075 inches first hole -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.506 inches and 1.563 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-507-2092 MPN LS15264V04-24Machine Screw
- 5305-01-171-0555 MPN ST3M455-3L21Close Tolerance Screw
- 5305-01-412-8689 MPN VCL0009-5-27Close Tolerance Screw
- 5305-01-455-1394 MPN 3M927-3L10Close Tolerance Screw
- 5305-01-512-8353 MPN 3M1170C3-6AFClose Tolerance Screw
- 5306-00-515-0686 MPN 9135M21P03Shoulder Bolt
- 5306-01-014-5125 MPN VAL23029-5-14Close Tolerance Bolt
- 5306-01-040-4699 MPN BACB30LM4-6Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-209-7950 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0002-3D21 | Valley-todeco, Inc. |
AIC688-3D21 | Sps Technologies, Llc |
PBF1266-3D21 | Sps Technologies, Llc |
122896-3D21 | Sps Technologies, Llc |
MB155-3D21 | Hi-shear Corporation |
ST3M747-3D21 | Boeing Company, The |
ST3M747-3D21 | Heartland Precision Fasteners, Inc. |
ST3M747-3D21 | Space-lok, Inc. |
S397-3D21 | Huck International, Inc. |
ST3M747-3D21 | B & B Specialties Inc. |
ST3M747-3D21 | Houston Precision Fasteners I, Lp |
ST3M747-3D21 | Fastener Innovation Technology, Inc. |
ST3M747-3D21 | Sps Technologies, Llc |
MB155-3D21 | Lisi Aerospace Canada Corp |
S397-3D21 | Huck Intl Inc |
VS3191-3D21 | Alcoa Global Fasteners, Inc. |
10116151 | Nimikkeistokeskus Ncb Finland |