NSN 5306-01-211-3794
Coaxial Connector
Between 1.330 inches and 1.360 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30LM3U16 for national stock number 5306012113794.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-211-3794.
-
MPN or Model
BACB30LM3U16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 1.330 inches and 1.360 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5306-00-043-2169 MPN 756171-105Machine Bolt
- 5306-01-051-5908 MPN C7521-5-11Close Tolerance Bolt
- 5306-01-131-2906 MPN VDP0002-2Assembled Washer Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
- 5306-01-384-3432 MPN VCG0002-4-12Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-211-3794 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3U16 | The Boeing Company |
BACB30LM3U16 | Valley-todeco, Inc. |
BACB30LM3U16 | Sps Technologies, Llc |
BACB30LM3U16 | Arconic Global Fasteners & Rings, |
BACB30LM3U16 | Sps Technologies, Llc |
BACB30LM3U16 | Alcoa Global Fasteners, Inc. |
BACB30LM3U16 | Federal Manufacturing Corporation |
BACB30LM3U16 | Sps Technologies, Llc |
BACB30LM3U16 | Huck International, Inc. |
BACB30LM3U16 | Sps Technologies, Llc |
BACB30LM3U16 | Voi-shan/chatsworth |
BACB30LM3U16 | Huck Intl Inc |