1-321-802-5889
Email Us

NSN 5306-01-211-4352

Close Tolerance Hex Head Bolt

About this product

Green dye or paint on the thread end.

Manufacturer part number BACB30LT6D19 for national stock number 5306012114352.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-211-4352.

  • MPN or Model

    BACB30LT6D19

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.445 inches and 0.495 inches
  • Fastener Length
    Between 1.643 inches and 1.673 inches
  • Head Style
    Double hexagon
  • Head Height
    Between 0.200 inches and 0.220 inches
  • Width Between Flats
    Between 0.553 inches and 0.564 inches
  • Grip Diameter
    Between 0.3735 inches and 0.3745 inches
  • Shank Unthreaded Hole Diameter
    0.106 inches and 0.116 inches first hole
  • Thread Diameter
    0.375 inches
  • Grip Length
    Between 1.178 inches and 1.198 inches
  • Thready Qty Per Inch (tpi)
    24
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.466 inches and 1.528 inches first hole
  • Surface Finish
    32.0 microinches threads
  • Material
    Iron alloy 660
  • Material Specification
    Ams5737 assn standard single material response
  • Surface Treatment
    Cadmium and chromate
  • Surface Treatment Specification
    Qq-p-416, type 2 class 2 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-211-4352 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306012114352

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
BACB30LT6D19 Federal Manufacturing Corporation
BACB30LT6D19 Sps Technologies, Llc
BACB30LT6D19 Sps Technologies, Llc
BACB30LT6D19 Textron Fastening Systems
BACB30LT6D19 The Boeing Company
BACV30LT6D19 Valley-todeco, Inc.
BACV30LT6D19 Insulation Supply Co
BACV30LT6D19 Huck International, Inc.
BACV30LT6D19 Arconic Global Fasteners & Rings,
BACV30LT6D19 Sps Technologies, Llc
BACB30LT6D19 Huck Intl Inc
BACB39LT6D19 Huck Intl Inc
BACB390LT6D19 Valley-todeco, Inc.
BACB30LT6D19 Sps Technologies, Llc
BACB30LT6D19 Alcoa Global Fasteners, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.