NSN 5305-01-603-8572
High Torque Screw
Mortorq spiral drive recess.
Manufacturer part number PMT1124-10 for national stock number 5305016038572.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-603-8572.
-
MPN or Model
PMT1124-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
0.941 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
0.1 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-600-0611 MPN PMT1153-10Close Tolerance Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
- 5305-01-496-1416 MPN TX1024C4D37-6AClose Tolerance Screw
- 5306-00-082-6869 MPN VFK100G-08016Shear Bolt
- 5306-00-901-4300 MPN MS21250-10028Shear Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
- 5306-01-142-3545 MPN VAL23608-4D94Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-603-8572 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PMT1124-10 | Phillips Screw Co |
PMT1124-10 | Sps Technologies, Llc |
PMT1124-10 | Valley-todeco, Inc. |
PMT1124-10 | Bimet Corp |
PMT1124-10 | Huck International, Inc. |
PMT1124-10 | 3-v Fastener Co., Inc. |
PMT1124-10 | Arconic Global Fasteners & Rings, |
PMT1124-10 | Sps Technologies, Llc |
PMT1124-10 | John Hassall, Inc. |
PMT1124-10 | Monogram Aerospace Fasteners, Inc. |