NSN 5306-01-214-5061
Close Tolerance Hex Head Bolt
Lubricated with cetyl alcohol.
Manufacturer part number BM3210-12A037 for national stock number 5306012145061.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-214-5061.
-
MPN or Model
BM3210-12A037
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.059 inches -
Fastener Length
3.371 inches -
Head Style
Double hexagon -
Head Height
0.400 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
2.312 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Steel comp h11 -
Surface Treatment
Chromate and nickel and cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-059-1956 MPN BACB30LU4-32Close Tolerance Screw
- 5306-00-143-1377 MPN 594383Machine Bolt
- 5306-00-467-0871 MPN J644P10AMachine Bolt
- 5306-00-762-2904 MPN VFK100G-06024Shear Bolt
- 5306-00-900-5282 MPN MS21250-05066Shear Bolt
- 5306-01-044-6540 MPN VAL23607-3-16Shoulder Bolt
- 5306-01-052-7624 MPN VCB0008C4-1580Shoulder Bolt
- 5306-01-054-3419 MPN C7521L6-13Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-214-5061 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM3210-12A037 | Huck International, Inc. |
11701A12U037 | Reid Products Inc. |
STSBG001A12U037 | Lockheed Martin Corporation |
STSBG001A12U037 | Sps Technologies, Llc |
STSBG001A12U037 | Sps Technologies, Llc |
STSBG001A12U037 | Valley-todeco, Inc. |
STSBG001A12U037 | Sps Technologies, Llc |
STSBG001A12U037 | Alcoa Global Fasteners, Inc. |
STSBG001A12U037 | Sps Technologies, Llc |
BM3210-12A037 | Huck Intl Inc |
VAL23602-12D037 | Valley-todeco, Inc. |
PBF1042A12U037 | Sps Technologies, Llc |
68485-12A037 | Sps Technologies, Llc |