NSN 5306-01-216-3993
Wheel Bolt
Between 3.440 inches and 3.500 inches fastener length, distorted head head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.551 inches and 0.563 inches .
Manufacturer part number 9434184 for national stock number 5306012163993.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-216-3993.
-
MPN or Model
9434184
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.000 inches and 1.188 inches -
Fastener Length
Between 3.440 inches and 3.500 inches -
Head Style
Distorted head -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.551 inches and 0.563 inches -
Locking Feature
Distortions top of head -
Thread Diameter
0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
130000 pounds per square inch -
Material
Steel -
Material Specification
Sae, gr8 assn standard all material responses -
Surface Treatment
Cadmium -
Surface Treatment Specification
G-4341-m, code 20u32 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-360-8299 MPN 5570480Plug Valve
- 5905-00-737-2059 MPN 1910173Inductive Wire Wound Fixed Resistor
- 4820-00-849-1220 MPN 3663932Drain Cock
- 5930-00-904-9853 MPN 6401063Thermostatic Switch
- 5940-00-966-1472 MPN 22ULug Terminal
- 4920-00-972-3493 MPN 7867805Phasemeter
- 4820-01-303-6521 MPN 3268752Gauge Inj Rack
- 5305-00-011-0600 MPN 110600Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-216-3993 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9434184 | Allison Transmission, Inc. |
9434184 | General Motors Corp |
29549599 | Allison Transmission, Inc. |