NSN 5306-01-218-3133
Coaxial Connector
Between 1.515 inches and 1.545 inches fastener length, spline extended washer head style, between 0.194 inches and 0.234 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number 122897-4-17 for national stock number 5306012183133.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-218-3133.
-
MPN or Model
122897-4-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.493 inches -
Fastener Length
Between 1.515 inches and 1.545 inches -
Head Style
Spline extended washer -
Head Height
Between 0.194 inches and 0.234 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.318 inches and 0.324 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-231-7418 MPN 3M925C5-13DClose Tolerance Screw
- 5305-01-452-1662 MPN LD111-0045-2418Close Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5306-00-291-5194 MPN VAL23033-8D44Shear Bolt
- 5306-01-005-0472 MPN VAL23029-4-14Close Tolerance Bolt
- 5306-01-130-7297 MPN VEP220121-4VH4Shear Bolt
- 5306-01-200-7747 MPN BACB30LJ4-10Close Tolerance Bolt
- 5306-01-212-3454 MPN BACB30LM4H4Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-218-3133 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| 122897-4-17 | Sps Technologies, Llc |
| ST3M753-4-17 | Fastener Innovation Technology, Inc. |
| VFK600-4-17 | Valley-todeco, Inc. |
| PBF1267-4-17 | Sps Technologies, Llc |
| 122897-4-17 | Sps Technologies, Llc |
| ST3M753-4-17 | Boeing Company, The |
| AIC763-4-17 | Sps Technologies, Llc |
| VS3190-4-17 | Arconic Global Fasteners & Rings, |
| HP7753-4-17 | Heartland Precision Fasteners, Inc. |
| S343-4-17 | Huck International, Inc. |
| AIC763-04-17 | Sps Technologies, Llc |
| MB156-4-17 | Hi-shear Corporation |
| MB156-4-17 | Lisi Aerospace Canada Corp |
| S343-4-17 | Huck Intl Inc |
| VS3190-4-17 | Alcoa Global Fasteners, Inc. |
| GS1032-4-17 | B & B Specialties Inc. |
Stock Check
