NSN 5306-01-227-3988
Shouldered Rivet Ring Bolt
About this product
Between 1.562 inches and 1.688 inches eye inside diameter, between 0.312 inches and 0.375 inches shoulder thickness, between 2.250 inches and 2.375 inches shank length, eye stock diameter: between 0.750 inches and 0.812 inches .
Manufacturer part number MS51937-9 for national stock number 5306012273988.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-227-3988.
-
MPN or Model
MS51937-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.5 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.812 inches -
Eye Inside Diameter
Between 1.562 inches and 1.688 inches -
Shoulder Thickness
Between 0.312 inches and 0.375 inches -
Shank Length
Between 2.250 inches and 2.375 inches -
Eye Stock Diameter
Between 0.750 inches and 0.812 inches -
Shoulder Diameter
Between 1.312 inches and 1.438 inches -
Overall Length
Between 5.750 inches and 6.188 inches -
Thread Diameter
0.875 inches -
Thready Qty Per Inch (tpi)
9 -
Distance From Center Of Eye To Shank End
Between 4.281 inches and 4.594 inches -
Eye Outside Width
3.188 inches -
Material
Steel -
Material Specification
Mil-b-45908 military specification single material response -
Thread Series Designator
Unc -
Specification Data
96906-ms51937 professional/industrial association standard
More from these suppliers
- 5935-00-136-3846 MPN MS18174-1Electrical Connector Insert
- 5935-00-168-1338 MPN MS24266R18B31S6LEVELXElectrical Plug Connector
- 5950-00-170-9769 MPN MS75084-07Radio Frequency Coil
- 5905-00-299-2054 MPN MS35044-9Composition Fixed Resistor
- 5935-00-331-8876 MPN MS27336P10B13SAElectrical Plug Connector
- 5935-00-402-7486 MPN MS17348R20N2SElectrical Receptacle Connector
- 5935-00-403-7651 MPN MS3114E12-8SElectrical Receptacle Connector
- 5940-00-501-5649 MPN MS21980-232Grounding Metallic Shielded Cable Ferrule
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-227-3988 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51937-9 | Military Standards |
MS51937-9 | Military Standards |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.