NSN 5306-01-229-0255
Close Tolerance Hex Head Bolt
Two holes spaced ninety degrees apart.
Manufacturer part number SS5115-6-60 for national stock number 5306012290255.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-229-0255.
-
MPN or Model
SS5115-6-60
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.431 inches -
Fastener Length
Between 4.281 inches and 4.301 inches -
Head Style
Dished hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches all holes -
Thread Diameter
0.375 inches -
Grip Length
Between 3.750 inches and 3.766 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.968 inches and 4.040 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-417-3471 MPN BACB30LM3D34Bolt Aircraft Hinge
- 5305-00-032-4375 MPN 68184-3-7Machine Screw
- 5305-00-115-6183 MPN 64228V5-12Close Tolerance Screw
- 5305-00-318-8649 MPN 106752B06-209CMachine Screw
- 5305-00-415-2082 MPN NAS1123-12HClose Tolerance Screw
- 5305-00-571-9596 MPN 76121-4-6Close Tolerance Screw
- 5305-00-754-4238 MPN NAS1204-9Close Tolerance Screw
- 5305-00-900-9645 MPN 3-56NF3AX3-16Setscrew
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-229-0255 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-6-60 | Sikorsky Aircraft Corporation |
SS5115-6-60 | Sps Technologies, Llc |
SS5116-6-60 | Sps Technologies, Llc |