NSN 5306-01-230-3358
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, between 0.078 inches and 0.110 inches shoulder thickness, between 0.578 inches and 0.625 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44-C4 for national stock number 5306012303358.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-230-3358.
-
MPN or Model
AN44-C4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
Between 0.078 inches and 0.110 inches -
Shank Length
Between 0.578 inches and 0.625 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
Between 0.609 inches and 0.641 inches -
Shank Unthreaded Hole Diameter
0.066 inches and 0.086 inches first hole -
Overall Length
1.484 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.125 inches -
Distance From Threaded End To Shank Hole Center
0.405 inches and 0.437 inches first hole -
Eye Outside Width
Between 0.609 inches and 0.641 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-004-5096 MPN NAS1351-4-18PSocket Head Cap Screw
- 5305-00-066-7322 MPN NASM24694-C52Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-151-9318 MPN NAS1218-08E38Machine Screw
- 5305-00-159-1432 MPN NAS1352-8-24PSocket Head Cap Screw
- 5305-00-174-0686 MPN NAS205-21Machine Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
- 5305-00-206-1289 MPN MS35214-45Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-230-3358 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-C4 | National Aerospace Standards |
AN44-C4 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.