NSN 5306-01-233-8674
Close Tolerance Hex Head Bolt
Between 0.746 inches and 0.776 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number H411-3-7 for national stock number 5306012338674.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-233-8674.
-
MPN or Model
H411-3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.746 inches and 0.776 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Head Minor Diameter
0.456 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-869-3223 MPN BACS12CK3U13Machine Screw
- 5305-01-185-7162 MPN LD111-0044-2304Close Tolerance Screw
- 5305-01-512-8294 MPN 3M1170C6-16AClose Tolerance Screw
- 5305-01-512-8347 MPN 3M1169V3-27AClose Tolerance Screw
- 5306-01-052-4441 MPN VAL22034-3G11Shear Bolt
- 5306-01-052-4442 MPN VAL22034-18F134Shear Bolt
- 5306-01-054-3423 MPN C7521L6-20Shear Bolt
- 5306-01-142-8369 MPN VAL23607-4-21Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-233-8674 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H411-3-7 | Huck International, Inc. |
120978-3-7 | Sps Technologies, Llc |
VCG0009-3-7 | Valley-todeco, Inc. |
AIC596-3-7 | Sps Technologies, Llc |
PBF7521-3-7 | Sps Technologies, Llc |
120978-3-7 | Sps Technologies, Llc |
C7521-3-7 | Lockheed Martin Corporation |
H411-3-7 | Huck Intl Inc |
C7521-3-7 | Alcoa Global Fasteners, Inc. |
C7521-3-7 | Sps Technologies, Llc |
SF118-3-7 | Saturn Fasteners Inc |
VS3133-3-7 | Tactair Fluid Controls, Inc. |