NSN 5306-01-262-9685
Coaxial Connector
1.181 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number SS5025-06-009N for national stock number 5306012629685.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-262-9685.
-
MPN or Model
SS5025-06-009N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.552 inches and 0.572 inches -
Fastener Length
1.181 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4340 or steel comp h11 -
Material Specification
Mil-s-5000 military specification 1st material response or ams 6485 assn standard 2nd material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response or ss8488 cagec 78286 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-038-1918 MPN 51B221-28Close Tolerance Screw
- 5305-00-143-1845 MPN A1C83-4-11Close Tolerance Screw
- 5305-00-172-6301 MPN NAS1101-6-20Machine Screw
- 5305-00-310-6038 MPN AIC813-04R9Machine Screw
- 5305-00-357-1869 MPN HT4028L4-7Close Tolerance Screw
- 5305-01-055-8809 MPN BACB30LU5-12Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-058-3872 MPN NAS1101-3-6BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-262-9685 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5025-06-009N | Sikorsky Aircraft Corporation |
SS5025-06-009N | Sps Technologies, Llc |
SS5025-06-009N | Huck International, Inc. |
SS5025-06-009N | Nylok Corporation |
SS5025-06-009N | Sps Technologies, Llc |
SS5025-06-009N | Sps Technologies, Llc |
SS5025-06-009N | Sps Technologies, Llc |
SS5025-06-009N | Huck Intl Inc |
SS5025-06-009N | M.s. Aerospace Inc. |
SS5025-06-009 | Sikorsky Aircraft Corporation |
Stock Check
- NE: 140
- NS: 6