NSN 5306-01-263-9143
Coaxial Connector
6.312 inches fastener length, double hexagon w/hole head style, 0.965 inches head height, width between flats: between 1.115 inches and 1.127 inches .
Manufacturer part number EWB22-14-53 for national stock number 5306012639143.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-263-9143.
-
MPN or Model
EWB22-14-53
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
6.312 inches -
Head Style
Double hexagon w/hole -
Head Height
0.965 inches -
Width Between Flats
Between 1.115 inches and 1.127 inches -
Extended Washer Diameter
Between 1.635 inches and 1.645 inches -
Extended Washer Thickness
0.211 inches -
Grip Diameter
0.874 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.875 inches -
Grip Length
4.812 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-2143 MPN 72791H3A6Close Tolerance Screw
- 5305-00-115-6183 MPN 64228V5-12Close Tolerance Screw
- 5305-00-177-5596 MPN CVC241-3-9Machine Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
- 5305-00-283-7506 MPN 66904H4-20Close Tolerance Screw
- 5305-00-660-3179 MPN BACB30LU4-6Machine Screw
- 5305-00-843-2841 MPN 28708-92C2Setscrew
- 5305-00-890-0085 MPN NAS1204-8DClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-263-9143 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB22-14-53 | Sps Technologies, Llc |