NSN 5305-00-288-2422
High Torque Screw
Between 1.263 inches and 1.310 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 642AS1004-4 for national stock number 5305002882422.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-288-2422.
-
MPN or Model
642AS1004-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.263 inches and 1.310 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
23-105 fscm 76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps 13145 fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-135-4146 MPN ST3M455-7L12Close Tolerance Screw
- 5306-01-182-1630 MPN 122897-3H6Shear Bolt
- 5306-01-488-3328 MPN 94133-3-28Machine Bolt
- 5306-01-541-5136 MPN 122896E4D13Close Tolerance Bolt
- 5320-00-400-5770 MPN HL911-5-4Pin-rivet
- 5320-01-129-0696 MPN HLT312-8-5Pin-rivet
- 5320-01-142-3249 MPN ST3M761V4-6Pin-rivet
- 5320-01-391-2285 MPN HST528DL-14-18Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-288-2422 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
642AS1004-4 | Zf Industrieantriebe Witten Gmbh |
66117H-5-13 | Zf Industrieantriebe Witten Gmbh |
HS2623-5Z-13 | Zf Industrieantriebe Witten Gmbh |
HS2623-5Z13 | Huck International, Inc. |
HT195-5-13 | Hi-shear Corporation |
66117H5-13 | Sps Technologies, Llc |
HT8115-5-13 | Alcoa Global Fasteners, Inc. |
HT195-5-13 | Lisi Aerospace Canada Corp |
3M263-5-13 | Boeing Company, The |
66117H5-13 | Sps Technologies Inc |
HS2623-5Z13 | Huck Intl Inc |
123840-5-10 | Sps Technologies, Llc |
66117H5-13 | Sps Technologies Inc |