NSN 5306-01-269-5129
Coaxial Connector
Longitudinal hole 0.350 in. Min. And 0.390 in. Max diameter,0.161 in. Min. Deep located in center of head.
Manufacturer part number S343-8-82F for national stock number 5306012695129.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-269-5129.
-
MPN or Model
S343-8-82F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.742 inches and 0.792 inches -
Fastener Length
Between 5.877 inches and 5.907 inches -
Head Style
Spline extended washer -
Head Height
Between 0.440 inches and 0.460 inches -
Extended Washer Diameter
Between 0.922 inches and 0.932 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 5.115 inches and 5.135 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488, ty2, cl3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-170-8489 MPN LD111-0044-2411Close Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5306-00-343-2924 MPN STSBG002A09U087Shear Bolt
- 5306-00-505-9885 MPN J646P14AMachine Bolt
- 5306-00-607-1143 MPN VCD0020-5-D31Shear Bolt
- 5306-01-043-5711 MPN VAL22034-8FS16Shear Bolt
- 5306-01-044-6526 MPN VAL23607-6D19Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-269-5129 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S343-8-82F | Huck International, Inc. |
VS3190-8-82F | Arconic Global Fasteners & Rings, |
ST3M753-8-82F | Boeing Company, The |
ST3M753-8-82F | Alcoa Global Fasteners, Inc. |
AIC763-8-82F | Sps Technologies, Llc |
VFK600-8-82F | Valley-todeco, Inc. |
PBF1267-8-82F | Sps Technologies, Llc |
MB156-8-82F | Hi-shear Corporation |
122897-8-82F | Sps Technologies, Llc |
MB156-8-82F | Lisi Aerospace Canada Corp |
S343-8-82F | Huck Intl Inc |
10116189 | Nimikkeistokeskus Ncb Finland |
VS3190-8-82F | Alcoa Global Fasteners, Inc. |
GS1032-8-82F | B & B Specialties Inc. |