NSN 5306-01-274-5393
Coaxial Connector
Between 1.160 inches and 1.190 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4D12 for national stock number 5306012745393.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-274-5393.
-
MPN or Model
BACB30NF4D12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.160 inches and 1.190 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Single Shear Strength
95000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6604d12 professional/industrial association standard
More from these suppliers
- 5940-00-688-6003 MPN NAS707-2Stud Terminal
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-052-9053 MPN MS24630-38Tapping Screw
- 5305-00-057-0535 MPN MS51958-51Machine Screw
- 5305-00-070-2147 MPN NAS1191C04P10LMachine Screw
- 5305-00-124-9781 MPN NAS1624-12Machine Screw
- 5305-00-146-7173 MPN NAS1101-3H40Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-274-5393 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4D12 | The Boeing Company |
NAS6604D12 | National Aerospace Standards |