NSN 5306-01-279-9131
Close Tolerance Hex Head Bolt
0.965 inches fastener length, double hexagon w/hole head style, 0.806 inches head height, width between flats: 1.059 inches .
Manufacturer part number SD300-81245 for national stock number 5306012799131.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-279-9131.
-
MPN or Model
SD300-81245
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 3.075 inches and 3.105 inches -
Fastener Length
0.965 inches -
Head Style
Double hexagon w/hole -
Head Height
0.806 inches -
Width Between Flats
1.059 inches -
Extended Washer Diameter
1.230 inches -
Extended Washer Thickness
0.250 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
2.125 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
125.0 microinches -
Material
Steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-438-7673 MPN 38194A-4Electrical Plug Connector
- 5305-00-100-6866 MPN 106752-04-157CMachine Screw
- 5305-00-166-8320 MPN SFT22-6A13Close Tolerance Screw
- 5305-00-310-5479 MPN 73573-98-15Socket Head Cap Screw
- 5305-00-505-2797 MPN LS15267V3-13Machine Screw
- 5305-01-014-2222 MPN S5008-3-8Close Tolerance Screw
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-032-3459 MPN NAS1221-08E10Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-279-9131 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SD300-81245 | Sps Technologies, Llc |