NSN 5306-01-308-8873
Coaxial Connector
0.859 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: 0.497 inches .
Manufacturer part number EWSB26-5-A8 for national stock number 5306013088873.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-308-8873.
-
MPN or Model
EWSB26-5-A8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.359 inches -
Fastener Length
0.859 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
0.497 inches -
Grip Diameter
0.311 inches -
End Application
C-141 engine pylon -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Stainless steel -
Material Specification
Ams 6485 assn standard single material response and ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type 1, class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-6914 MPN 454208Machine Screw
- 5305-00-395-8674 MPN 4041088Shoulder Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-660-3149 MPN NAS1203-12Close Tolerance Screw
- 5305-00-701-7795 MPN NAS1123-11Machine Screw
- 5305-00-815-0692 MPN NAS1122-4HClose Tolerance Screw
- 5305-00-917-6324 MPN NAS1134-13Close Tolerance Screw
- 5305-01-027-2004 MPN 110179-3-13Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-308-8873 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB26-5-A8 | Sps Technologies, Llc |