NSN 5306-01-309-3742
Coaxial Connector
Between 1.043 inches and 1.073 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number C7521-4-11 for national stock number 5306013093742.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-309-3742.
-
MPN or Model
C7521-4-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 1.043 inches and 1.073 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
Between 0.448 inches and 0.455 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5306-00-131-7218 MPN MS21250-05038Shear Bolt
- 5306-00-515-0539 MPN J643P13AMachine Bolt
- 5306-01-044-6563 MPN VEH160271-3M-10Close Tolerance Bolt
- 5306-01-165-2454 MPN VCG0001-6D16Close Tolerance Bolt
- 5306-01-165-2455 MPN LD111-0026-0517Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-309-3742 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7521-4-11 | Valley-todeco, Inc. |
C7521-4-11 | Sps Technologies, Llc |
C7521-4-11 | Arconic Global Fasteners & Rings, |
C7521-4-11 | Huck International, Inc. |
C7521-4-11 | Sps Technologies, Llc |
C7521-4-11 | Sps Technologies, Llc |
PBF7521-4-11 | Sps Technologies, Llc |
C7521-4-11 | Lockheed Martin Corporation |
120978-4-11 | Sps Technologies, Llc |
VCG0009-4-11 | Valley-todeco, Inc. |
AIC596-4-11 | Sps Technologies, Llc |
H411-4-11 | Huck Intl Inc |
9120978-4-11 | Sps Technologies, Llc |
VS3133-4-11 | Arconic Global Fasteners & Rings, |
H411-4-11 | Huck International, Inc. |
C7521-4-11 | Alcoa Global Fasteners, Inc. |
VS3133-4-11 | Alcoa Global Fasteners, Inc. |
Stock Check
- NS: 100
- NE: 373