NSN 5305-01-043-1371
High Torque Screw
Between 1.464 inches and 1.511 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number BM19045-4-19 for national stock number 5305010431371.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-043-1371.
-
MPN or Model
BM19045-4-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 1.464 inches and 1.511 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510n manufacturers standard
More from these suppliers
- 1560-00-927-0319 MPN 32-511554-3Compression Engine Mount Bolt
- 5305-00-508-2777 MPN LS15267V3-39Machine Screw
- 5305-00-508-3152 MPN LS15265V4-8Close Tolerance Screw
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-512-8293 MPN 3M1170C4-20AClose Tolerance Screw
- 5305-01-512-8368 MPN 3M1170C4-4AClose Tolerance Screw
- 5306-01-043-5721 MPN VEP220121-5FH12Shear Bolt
- 5306-01-131-2179 MPN VEP220221-5F8Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-043-1371 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19045-4-19 | Huck International, Inc. |
HT326-4A19 | Hi-shear Corporation |
SFH22D4A19 | Sps Technologies, Llc |
HT8181F4-19 | Alcoa Global Fasteners, Inc. |
GB510FG4-19 | Valley-todeco, Inc. |
HT326-4A19 | Lisi Aerospace Canada Corp |
GB510FG4-19 | Sps Technologies, Llc |
GB510N4A19 | Northrop Grumman Systems Corporation |
BM19045-4-19 | Huck Intl Inc |
SFH22D4A19 | Sps Technologies, Llc |
HT326-4A19 | Hi-shear Corporation |
SFH22D4A19 | Sps Technologies, Llc |
HT8181F4-19 | Alcoa Global Fasteners, Inc. |
GB510N4A19 | Northrop Grumman Systems Corporation |
SFH22D4A19 | Sps Technologies, Llc |
BM19045-4-19 | Huck Intl Inc |