NSN 5306-01-313-9204
Coaxial Connector
Between 3.438 inches and 3.468 inches fastener length, spline extended washer head style, between 0.590 inches and 0.610 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number MS21134-12038 for national stock number 5306013139204.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-313-9204.
-
MPN or Model
MS21134-12038
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.053 inches and 1.103 inches -
Fastener Length
Between 3.438 inches and 3.468 inches -
Head Style
Spline extended washer -
Head Height
Between 0.590 inches and 0.610 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-412-5464 MPN GB510FG8-32Close Tolerance Screw
- 5305-01-435-3141 MPN BACB30LU6-23Close Tolerance Screw
- 5306-00-043-2173 MPN 756327-101Machine Bolt
- 5306-01-145-4561 MPN BACB30LJ3DU12Close Tolerance Bolt
- 5306-01-195-0055 MPN VFK600-5-17Shear Bolt
- 5306-01-197-2396 MPN LD111-0020-0516Shear Bolt
- 5306-01-202-6854 MPN BACB30LJ4U10Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-313-9204 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-12038 | National Aerospace Standards |
MS21250-12038 | Sps Technologies, Llc |
MS21250-12038 | Arconic Global Fasteners & Rings, |
MS21250-12038 | Huck International, Inc. |
MS21250-12038 | Sps Technologies, Llc |
MS21250-12038 | Sps Technologies, Llc |
MS21250-12038 | Hi-shear Corporation |
MS21250-12038 | Alcoa Global Fasteners, Inc. |
VAL21013-12038 | Valley-todeco, Inc. |
MS21250-12038 | Mercury Aerospace Fasteners Inc |
MS21250-12038 | Military Standards |
MS21134-12038 | Military Standards |