NSN 5306-01-318-9099
Wheel Bolt
Between 0.797 inches and 0.843 inches fastener length, hexagon head style, between 0.094 inches and 0.106 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS21095-1008 for national stock number 5306013189099.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-318-9099.
-
MPN or Model
MS21095-1008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.353 inches -
Fastener Length
Between 0.797 inches and 0.843 inches -
Head Style
Hexagon -
Head Height
Between 0.094 inches and 0.106 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Thread Diameter
0.138 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Hardness Rating
26.0 rockwell c fastener and 32.0 rockwell c fastener -
Material
Steel comp 431 fastener -
Material Specification
Mil-s-18732 military specification single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-113-8184 MPN MS20536-150Lug Terminal
- 5940-00-115-2684 MPN MS20659Lug Terminal
- 5935-00-171-0133 MPN MS27473T24B35SAElectrical Plug Connector
- 5935-00-171-0142 MPN MS27484T24A2SElectrical Plug Connector
- 5935-00-196-4639 MPN MS3102A24-22PElectrical Receptacle Connector
- 5940-00-204-6903 MPN MS21980-348Grounding Metallic Shielded Cable Ferrule
- 5940-00-231-1603 MPN MS20659-32Lug Terminal
- 5905-00-249-4200 MPN MS35043-110Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-318-9099 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-1008 | Military Standards |