NSN 5306-01-319-4843
Coaxial Connector
Between 2.236 inches and 2.266 inches fastener length, spline extended washer head style, between 0.495 inches and 0.515 inches head height, extended washer diameter: between 0.928 inches and 0.938 inches .
Manufacturer part number VS3320-9-22 for national stock number 5306013194843.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-319-4843.
-
MPN or Model
VS3320-9-22
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.876 inches -
Fastener Length
Between 2.236 inches and 2.266 inches -
Head Style
Spline extended washer -
Head Height
Between 0.495 inches and 0.515 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
Between 0.102 inches and 0.122 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Head Minor Diameter
0.711 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-109-6713 MPN J642P15FMachine Screw
- 5305-01-513-9494 MPN ST3M557-3-10Close Tolerance Screw
- 5306-00-727-0720 MPN VAL21013-12052Shear Bolt
- 5306-01-028-2464 MPN GB511B6-14Shear Bolt
- 5306-01-056-3192 MPN VAL22034-8G29Shear Bolt
- 5306-01-134-2715 MPN VEP220121-6V19Shear Bolt
- 5306-01-165-2454 MPN VCG0001-6D16Close Tolerance Bolt
- 5306-01-167-6314 MPN LD111-0021-0409Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-319-4843 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3320-9-22 | Alcoa Global Fasteners, Inc. |
AIC1655-9-22 | Sps Technologies, Llc |
VCG0017-9-22 | Valley-todeco, Inc. |
03A100-9-22 | Northrop Grumman Systems Corporation |
PBF1422-9-22 | Sps Technologies, Llc |
123711-9-22 | Sps Technologies, Llc |
SII1185-9-22 | Sonic Industries Inc. |
MB211-9-22 | Hi-shear Corporation |
MB211-9-22 | Lisi Aerospace Canada Corp |
VS3320-9-22 | Voi-shan/chatsworth |
X385-9-22 | Huck Intl Inc |
X385-9-22 | Huck International, Inc. |