1-321-802-5889
Email Us

NSN 5306-01-331-5806

Close Tolerance Hex Head Bolt

About this product

Between 3.205 inches and 3.235 inches fastener length, double hexagon w/hole head style, between 0.730 inches and 0.770 inches head height, width between flats: between 1.052 inches and 1.064 inches .

Manufacturer part number 84725-16H30 for national stock number 5306013315806.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-331-5806.

  • MPN or Model

    84725-16H30

  • Schedule B
    7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire))
  • NMF (National Motor Freight)
    139820 - Nickel Bolts/nails/nuts/rivets Etc
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    1.345 inches
  • Fastener Length
    Between 3.205 inches and 3.235 inches
  • Head Style
    Double hexagon w/hole
  • Head Height
    Between 0.730 inches and 0.770 inches
  • Width Between Flats
    Between 1.052 inches and 1.064 inches
  • Extended Washer Diameter
    Between 1.615 inches and 1.625 inches
  • Extended Washer Thickness
    0.222 inches
  • Hole Diameter
    Between 0.050 inches and 0.060 inches
  • Grip Diameter
    Between 0.9985 inches and 0.9995 inches
  • Thread Diameter
    1.000 inches
  • Grip Length
    Between 1.865 inches and 1.885 inches
  • Hole Quantity
    4
  • Hole Type
    Drilled
  • Thready Qty Per Inch (tpi)
    12
  • Hole Configuration Style
    Double hexagon longitudinal hole
  • Part Name Assigned By Controlling Agency
    Navy special project
  • Material
    Nickel alloy 718
  • Material Specification
    Ams5662 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-331-5806 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306013315806

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
84725-16H30 Sps Technologies, Llc
PBF1478-16H30 Sps Technologies, Llc
GB511GF16H30 Northrop Grumman Systems Corporation
VCC0090-16H30 Valley-todeco, Inc.
84725-16H30 Sps Technologies, Llc
GB511GF16H30 Northrop Grumman Systems Corporation
PBF1478-16H30 Sps Technologies, Llc
VCC0090-16H30 Valley-todeco, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.