NSN 5306-01-332-7106
Coaxial Connector
Between 3.216 inches and 3.246 inches fastener length, spline extended washer head style, 0.600 inches head height, extended washer diameter: between 1.384 inches and 1.394 inches .
Manufacturer part number 3408-12-32 for national stock number 5306013327106.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-332-7106.
-
MPN or Model
3408-12-32
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.231 inches -
Fastener Length
Between 3.216 inches and 3.246 inches -
Head Style
Spline extended washer -
Head Height
0.600 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-132-4366 MPN HT4025L4-6Close Tolerance Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5305-01-515-4398 MPN BACB30NN4K14Close Tolerance Screw
- 5306-00-150-3553 MPN GB511B9-27Shear Bolt
- 5306-01-174-3547 MPN LD111-0021-1022Shear Bolt
- 5306-01-195-5055 MPN VCG0002-14D69Close Tolerance Bolt
- 5306-01-200-7747 MPN BACB30LJ4-10Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-332-7106 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3408-12-32 | Alcoa Global Fasteners, Inc. |
VCG0027-12-32 | Valley-todeco, Inc. |
PBF1535-12-32 | Sps Technologies, Llc |
80994-12-32 | Sps Technologies, Llc |
3D0013-12-32 | Boeing Company, The |
AIC871-12-32 | Sps Technologies, Llc |