NSN 5306-01-336-6318
Close Tolerance Hex Head Bolt
Dry film lube on bearing surface of head:hole drilled in shank,0.106 in. Dia x 0.373/0.374 in. Nom deep.
Manufacturer part number AIC596-6DN28 for national stock number 5306013366318.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-336-6318.
-
MPN or Model
AIC596-6DN28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.570 inches -
Fastener Length
Between 2.189 inches and 2.219 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.373 inches and 0.374 inches -
Head Minor Diameter
0.679 inches -
End Application
Pacer dawn -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp h11 -
Material Specification
Ams-6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-0068 MPN BACB30LU14-11Close Tolerance Screw
- 5305-01-435-3850 MPN BACB30LU7-35Close Tolerance Screw
- 5305-01-440-4559 MPN 3M1169V3-20Close Tolerance Screw
- 5305-01-462-2861 MPN 3M1169V3-8AClose Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5306-00-193-0815 MPN VEP220121-6F13Shear Bolt
- 5306-00-765-3354 MPN VAL21013-12030Shear Bolt
- 5306-00-925-9698 MPN VFK100G-06006Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-336-6318 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596-6DN28 | Sps Technologies, Llc |
VCG0030-6DN28 | Valley-todeco, Inc. |
PBF7521-6DN28 | Sps Technologies, Llc |
120978-6-D28N | Sps Technologies, Llc |
VS3133-6DN28 | Alcoa Global Fasteners, Inc. |
H411-6DN28 | Huck Intl Inc |
5306-002-6DN28 | Aidc/aerospace Industrialdevelopment |
H411-6DN28 | Huck International, Inc. |