NSN 5306-01-337-9645
Coaxial Connector
Between 3.751 inches and 3.781 inches fastener length, double hexagon extended washer head style, 0.435 inches head height, width between flats: 0.576 inches .
Manufacturer part number EWB0420D-7-36 for national stock number 5306013379645.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-337-9645.
-
MPN or Model
EWB0420D-7-36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.758 inches -
Fastener Length
Between 3.751 inches and 3.781 inches -
Head Style
Double hexagon extended washer -
Head Height
0.435 inches -
Width Between Flats
0.576 inches -
Extended Washer Diameter
0.745 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.437 inches -
Grip Length
3.008 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6804 MPN 3M1318-6-8-2Turnlock Receptacle
- 5305-00-034-1601 MPN 106750-3-41DClose Tolerance Screw
- 5305-00-136-2800 MPN NAS1190-02P4Machine Screw
- 5305-00-420-8259 MPN NAS1135-17Close Tolerance Screw
- 5305-00-541-9195 MPN 106706H8A13Close Tolerance Screw
- 5305-00-754-3058 MPN NAS1203-10Close Tolerance Screw
- 5305-00-809-1740 MPN 51B334-3Close Tolerance Screw
- 5305-00-842-6994 MPN NAS1203-5DClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-337-9645 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB0420D-7-36 | Sps Technologies, Llc |