NSN 5306-01-338-7282
Coaxial Connector
Threaded hole in top of head 0.138-32 unjc-3b. Injection port 0.120 in. Lg; 0.060 in. Wide in unthd shank; distance from head to beginning of injection port 0.100 in. Lg..
Manufacturer part number 3M1043-4-5-10 for national stock number 5306013387282.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-338-7282.
-
MPN or Model
3M1043-4-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.297 inches and 0.312 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-103-8819 MPN 3M926-3L6Close Tolerance Screw
- 5305-01-373-4843 MPN ST3M557-9-17Close Tolerance Screw
- 5305-01-512-8359 MPN 3M1170C5-18AClose Tolerance Screw
- 5306-00-434-4643 MPN GB511H-4-17Shear Bolt
- 5306-01-044-2985 MPN VAL23607-4-32Shoulder Bolt
- 5306-01-177-0875 MPN ST3M571-6H20Close Tolerance Bolt
- 5306-01-194-7048 MPN ST3M753-12H28Shear Bolt
- 5306-01-210-0758 MPN VAL23033-6-12XShoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-338-7282 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1043-4-5-10 | Boeing Company, The |
11841-4-5-10 | Reid Products Inc. |
3M1043-4-5-10 | Valley-todeco, Inc. |
3M1043-4-5-10 | Sps Technologies, Llc |
3M1043-4-5-10 | Sps Technologies, Llc |
3M1043-4-5-10 | Alcoa Global Fasteners, Inc. |
3M1043-4-5-10 | Hi-shear Corporation |
3M1043-4-5-10 | Boeing Company, The |
3M1043-4-5-10 | Valley-todeco, Inc. |
3M1043-4-5-10 | Sps Technologies, Llc |
3M1043-4-5-10 | Hi-shear Corporation |
3M1043-4-5-10 | Sps Technologies, Llc |
3M1043-4-5-10 | Alcoa Global Fasteners, Inc. |