NSN 5306-01-342-2716
Coaxial Connector
Between 3.382 inches and 3.412 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 84269-4-48D for national stock number 5306013422716.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-342-2716.
-
MPN or Model
84269-4-48D
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 3.382 inches and 3.412 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Head Minor Diameter
0.447 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.249 inches first hole and 3.311 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5143 MPN ST3M455-4L4-1Close Tolerance Screw
- 5305-01-339-0223 MPN BACB30NT4K5Close Tolerance Screw
- 5305-01-462-2887 MPN TX1027C3-8AClose Tolerance Screw
- 5306-01-012-0621 MPN VAL23001-7-D038Shear Bolt
- 5306-01-046-1189 MPN VAL23608-5-11Shoulder Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-135-2389 MPN VDP0002-9Assembled Washer Bolt
- 5306-01-234-7541 MPN ST3M607-6H20Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-342-2716 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84269-4-48D | Sps Technologies, Llc |
VCJ0002-4-48D | Valley-todeco, Inc. |
AIC1237-4-48D | Sps Technologies, Llc |
PBF1542-4-48D | Sps Technologies, Llc |
3D0029-4-48D | Boeing Company, The |
1237-4-48D | Sps Technologies, Llc |