NSN 5306-01-343-8814
Coaxial Connector
Between 3.978 inches and 4.008 inches fastener length, double hexagon w/hole head style, between 0.608 inches and 0.628 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number GB511GF10-50 for national stock number 5306013438814.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-343-8814.
-
MPN or Model
GB511GF10-50
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.868 inches -
Fastener Length
Between 3.978 inches and 4.008 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.608 inches and 0.628 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
0.150 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 3.115 inches and 3.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-454-0735 MPN LD111-0046-2306Machine Screw
- 5305-01-462-2749 MPN 3M1169V6-20AClose Tolerance Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5306-00-915-2717 MPN VFK100G-07048Shear Bolt
- 5306-01-044-5194 MPN VAL23607-5D13Shoulder Bolt
- 5306-01-044-7456 MPN VAL23607-3-13Shoulder Bolt
- 5306-01-045-9506 MPN VAL23608-3-26Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-343-8814 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GF10-50 | Northrop Grumman Systems Corporation |
GB511GF10-50 | Sps Technologies, Llc |
GB511GF10-50 | Valley-todeco, Inc. |
GB511GF10-50 | Sps Technologies, Llc |
GB511GF10-50 | Sps Technologies, Llc |
VCC0090-10-50 | Valley-todeco, Inc. |
PBF1478-10-50 | Sps Technologies, Llc |