NSN 5306-01-343-8820
Coaxial Connector
Between 2.057 inches and 2.104 inches fastener length, double hexagon head style, between 0.340 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number PBF1479-10-21A for national stock number 5306013438820.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-343-8820.
-
MPN or Model
PBF1479-10-21A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.761 inches -
Fastener Length
Between 2.057 inches and 2.104 inches -
Head Style
Double hexagon -
Head Height
Between 0.340 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
1.312 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8359 MPN 3M1170C5-18AClose Tolerance Screw
- 5306-00-819-3484 MPN 684018-18Machine Bolt
- 5306-01-044-2963 MPN VAL23607-4-4Shoulder Bolt
- 5306-01-067-8530 MPN VAL23033-4H44Shear Bolt
- 5306-01-131-2180 MPN VEP220221-5F7Shear Bolt
- 5306-01-206-3443 MPN VAL23033-5D16XShoulder Bolt
- 5306-01-377-1071 MPN VCG0027-6-31Shear Bolt
- 5306-01-379-8672 MPN ST3M571-9-20Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-343-8820 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1479-10-21A | Sps Technologies, Llc |
VCD0020-10-21 | Valley-todeco, Inc. |
92147-10-21A | Sps Technologies, Llc |
GB511GG10-21A | Northrop Grumman Systems Corporation |