NSN 5306-01-346-6153
Coaxial Connector
2.562 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: 0.562 inches .
Manufacturer part number NAS464-6L34 for national stock number 5306013466153.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-346-6153.
-
MPN or Model
NAS464-6L34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.437 inches -
Fastener Length
2.562 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.562 inches -
Grip Diameter
0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
2.125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 4920-01-580-8295 MPN S281A001-501Aircraft Maintenance Fixture
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-008-9114 MPN NAS1190E02T6LSocket Head Cap Screw
- 5305-00-052-6876 MPN MS24627-52Tapping Screw
- 5305-00-066-7327 MPN MS24693-C28Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-346-6153 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-6L34 | National Aerospace Standards |