NSN 5306-01-348-8448
Coaxial Connector
Between 3.193 inches and 3.240 inches fastener length, double hexagon head style, between 0.529 inches and 0.549 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number PBF1479-16D32A for national stock number 5306013488448.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-348-8448.
-
MPN or Model
PBF1479-16D32A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.209 inches -
Fastener Length
Between 3.193 inches and 3.240 inches -
Head Style
Double hexagon -
Head Height
Between 0.529 inches and 0.549 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.9985 inches and 0.9990 inches -
Thread Diameter
1.000 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-629-9065 MPN BACB30LU4-30Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30NF6H18Close Tolerance Bolt
- 5306-01-043-5708 MPN VCC0090-7-12Shear Bolt
- 5306-01-055-7735 MPN C9851-12Machine Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-141-7888 MPN VAL23608-4-53Shoulder Bolt
- 5306-01-142-2898 MPN VAL23608-8D39Shoulder Bolt
- 5306-01-142-9379 MPN VAL23607-4D5Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-348-8448 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1479-16D32A | Sps Technologies, Llc |
VCD0020-16D32A | Valley-todeco, Inc. |
92147-16D32A | Sps Technologies, Llc |
GB511GG16D32A | Northrop Grumman Systems Corporation |
GB511B16D32 | Northrop Grumman Systems Corporation |
EWSB22-16-32 | Sps Technologies, Llc |
VS2521-16FS32 | Alcoa Global Fasteners, Inc. |