NSN 5305-01-056-2159
High Torque Screw
Between 0.518 inches and 0.548 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LU3D3 for national stock number 5305010562159.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-056-2159.
-
MPN or Model
BACB30LU3D3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.518 inches and 0.548 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.370 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-347-7853 MPN LS15265V3-18Close Tolerance Screw
- 5305-01-412-5358 MPN LD111-0045-2310Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-462-2724 MPN 3M1169V3-10AClose Tolerance Screw
- 5305-01-462-2729 MPN 3M1169V4-6AClose Tolerance Screw
- 5306-00-914-3239 MPN GB511C8-18Shear Bolt
- 5306-01-044-6540 MPN VAL23607-3-16Shoulder Bolt
- 5306-01-046-0526 MPN VAL23033-3X5Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-056-2159 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU3D3 | The Boeing Company |
BACB30LU3D3 | Valley-todeco, Inc. |
BACB30LU3D3 | Sps Technologies, Llc |
BACB30LU3D3 | Arconic Global Fasteners & Rings, |
BACB30LU3D3 | Federal Manufacturing Corporation |
BACB30LU3D3 | Sps Technologies, Llc |
BACB30LU3D3 | Sonic Industries Inc. |
BACB30LU3D3 | Alcoa Global Fasteners, Inc. |
BACB30LU3D3 | Voi-shan/chatsworth |
BACB30LU3D3 | Sps Technologies, Llc |