NSN 5306-01-349-9563
Coaxial Connector
Between 2.813 inches and 2.843 inches fastener length, double hexagon w/hole head style, between 0.547 inches and 0.567 inches head height, width between flats: between 0.616 inches and 0.627 inches .
Manufacturer part number 84725-9-32 for national stock number 5306013499563.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-349-9563.
-
MPN or Model
84725-9-32
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.828 inches -
Fastener Length
Between 2.813 inches and 2.843 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.547 inches and 0.567 inches -
Width Between Flats
Between 0.616 inches and 0.627 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
Between 0.123 inches and 0.143 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-435-5786 MPN BACB30LU8-29Close Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5306-00-803-9406 MPN GB511H6-16Machine Bolt
- 5306-01-044-2963 MPN VAL23607-4-4Shoulder Bolt
- 5306-01-381-3841 MPN VCG0037-12-32Shear Bolt
- 5305-00-487-5275 MPN AIC1023H5-13Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-349-9563 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84725-9-32 | Sps Technologies, Llc |
GB511GF9-32 | Northrop Grumman Systems Corporation |
GB511GF9-32 | Sps Technologies, Llc |
VCC0090-9-32 | Valley-todeco, Inc. |
PBF1478-9-32 | Sps Technologies, Llc |