NSN 5305-01-432-5894
High Torque Screw
Between 0.834 inches and 0.854 inches fastener length, flat countersunk head style, between 0.438 inches and 0.445 inches head diameter, internal drive style: six spline.
Manufacturer part number TX1027D4-6A for national stock number 5305014325894.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-432-5894.
-
MPN or Model
TX1027D4-6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 0.834 inches and 0.854 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.438 inches and 0.445 inches -
Internal Drive Style
Six spline -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.375 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Ph13-8-0 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-005-4022 MPN ST3M652C3-5AClose Tolerance Screw
- 5305-01-090-6337 MPN BACB30LR4-21Close Tolerance Screw
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-172-8200 MPN HS4727-3-26Close Tolerance Screw
- 5305-01-195-7947 MPN HT4075V4-10-42Close Tolerance Screw
- 5306-01-043-5720 MPN VEP220121-4VH14Shear Bolt
- 5306-01-045-6576 MPN VAL23033-4-12XShoulder Bolt
- 5306-01-054-3406 MPN C7521-4-7Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-432-5894 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX1027D4-6A | Sps Technologies Inc |
TX1027D4-6A | Alcoa Fastening Systems |
TX1027D4-6A | Sps Technologies, Llc |
TX1027D4-6A | Arconic Global Fasteners & Rings, |
HP1170D4-6 | Heartland Precision Fasteners, Inc. |
TX1027D4-6A | Sps Technologies, Llc |
TX1027D4-6A | Sps Technologies, Llc |
TX1027D4-6A | Hi-shear Corporation |
TX1027D4-6A | Lisi Aerospace Canada Corp |
3M1170D4-6A | Boeing Company, The |
3M1170D4-6A | Arconic Global Fasteners & Rings, |
3M1170D4-6A | Sps Technologies, Llc |
3M1170D4-6A | Heartland Precision Fasteners, Inc. |
3M1170D4-6A | Sps Technologies, Llc |
11825D4-6A | Reid Products Inc. |
11845D4-6A | Reid Products Inc. |
3M1170D4-6A | Alcoa Fastening Systems |
3M1170D4-6A | Huck International, Inc. |
3M1170D4-6A | Valley-todeco, Inc. |
3M1170D4-6A | B & B Specialties Inc. |
3M1170D4-6A | Houston Precision Fasteners I, Lp |
TX1027D4-6A | Sps Technologies, Llc |
3M1170D4-6A | Alcoa Global Fasteners, Inc. |
3M1170D4-6A | Fastener Innovation Technology, Inc. |
3M1170D4-6A | Reid Products Inc. |
3M1170D4-6A | West Coast Aerospace Inc |
10113810 | Nimikkeistokeskus Ncb Finland |