NSN 5306-01-354-1529
Coaxial Connector
Between 1.782 inches and 1.812 inches fastener length, double hexagon extended washer head style, between 0.552 inches and 0.572 inches head height, width between flats: between 0.673 inches and 0.688 inches .
Manufacturer part number MS21296H10011 for national stock number 5306013541529.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-354-1529.
-
MPN or Model
MS21296H10011
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.095 inches -
Fastener Length
Between 1.782 inches and 1.812 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.552 inches and 0.572 inches -
Width Between Flats
Between 0.673 inches and 0.688 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
Between 0.080 inches and 0.100 inches -
Grip Diameter
Between 0.623 inches and 0.640 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
70800 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
96906-ms21296h10011 government standard
More from these suppliers
- 5935-00-180-2603 MPN NAS1650R10B6SNElectrical Receptacle Connector
- 1680-01-543-1557 MPN MS20253P2-2940LHeadless Straight Pin
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-059-4573 MPN MS35190-258Machine Screw
- 5305-00-068-5842 MPN MS24678-40CSocket Head Cap Screw
- 5305-00-104-5081 MPN NAS1352-7LE48PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-354-1529 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296H10011 | National Aerospace Standards |
MS21296H10011 | Military Standards |