NSN 5306-01-359-6928
Coaxial Connector
Between 0.840 inches and 0.887 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: 0.553 inches .
Manufacturer part number EWSBM26-6-7 for national stock number 5306013596928.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-359-6928.
-
MPN or Model
EWSBM26-6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.419 inches -
Fastener Length
Between 0.840 inches and 0.887 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
0.553 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, ty1, cl2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-461-5598 MPN 64040H10-18Close Tolerance Screw
- 5305-00-505-4217 MPN LS9682V8Machine Screw
- 5305-00-753-4305 MPN 38030-3F8CSocket Head Cap Screw
- 5305-00-819-6548 MPN NAS1143-2Close Tolerance Screw
- 5305-00-899-1934 MPN 66117H8-15Machine Screw
- 5305-00-941-0212 MPN 502089Machine Screw
- 5305-01-047-0481 MPN HT4011-5-7Shoulder Screw
- 5305-01-080-1702 MPN NAS1101E4-22Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-359-6928 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSBM26-6-7 | Sps Technologies, Llc |