NSN 5306-01-367-9816
Coaxial Connector
3.750 inches fastener length, double hexagon w/hole head style, 0.276 inches head height, width between flats: 0.419 inches .
Manufacturer part number VAL23009-5-052 for national stock number 5306013679816.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-367-9816.
-
MPN or Model
VAL23009-5-052
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
3.750 inches -
Head Style
Double hexagon w/hole -
Head Height
0.276 inches -
Width Between Flats
0.419 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 3.240 inches and 3.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Stsbs003, cagec 98897 mfr ref single material response -
Surface Treatment
Chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-102-1869 MPN ST3M454-5L9Close Tolerance Screw
- 5305-01-164-2330 MPN BACB30LU3P6Close Tolerance Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-453-9590 MPN LD111-0045-2305Machine Screw
- 5305-01-477-5611 MPN 3M1034C6-15-49Close Tolerance Screw
- 5306-00-443-6815 MPN MS21250-06070Shear Bolt
- 5306-00-935-7528 MPN VFK100G-05028Shear Bolt
- 5306-01-022-3052 MPN 9146M63P01Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-367-9816 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL23009-5-052 | Valley-todeco, Inc. |
AIC2267A-5052 | Sps Technologies, Llc |
PBF1045A-5052 | Sps Technologies, Llc |
69680-5-052 | Sps Technologies, Llc |
STSBG004 | Lockheed Martin Corporation |
11697A05U052 | Reid Products Inc. |
STSBG004A05U052 | Lockheed Martin Corporation |