NSN 5306-01-368-7316
Coaxial Connector
Centerdrill in point end at manufacturer's option on dash number 12 and 14 sizes.
Manufacturer part number 84268-12-40 for national stock number 5306013687316.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-368-7316.
-
MPN or Model
84268-12-40
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.149 inches -
Fastener Length
Between 3.634 inches and 3.664 inches -
Head Style
Spline extended washer -
Head Height
0.600 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
0.108 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Head Minor Diameter
Between 0.797 inches and 0.812 inches -
Thread Diameter
0.750 inches -
Grip Length
2.500 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
18000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-00-143-3054 MPN 9628M72P02Machine Bolt
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-518-6287 MPN 9085M98P01Shoulder Bolt
- 5306-00-727-0720 MPN VAL21013-12052Shear Bolt
- 5306-00-814-8382 MPN 3M33-4-19AClose Tolerance Bolt
- 5306-01-044-2211 MPN VAL23607-4D29Shoulder Bolt
- 5306-01-045-6584 MPN VAL23607-3-31Shoulder Bolt
- 5306-01-054-4598 MPN BACB30NE3D5Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-368-7316 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84268-12-40 | Sps Technologies, Llc |
VCG0038-12-40 | Valley-todeco, Inc. |
AIC872-12-40 | Sps Technologies, Llc |
SLB264-12-40 | Space-lok, Inc. |
PBF1593-12-40 | Sps Technologies, Llc |
3447-12-40 | Arconic Global Fasteners & Rings, |
3D0028-12-40 | Boeing Company, The |
872-12-40 | Sps Technologies, Llc |