NSN 5306-01-382-5999
Wheel Bolt
Thread is a safety critical thread in accordance with mil-s-8879 under application category safety critical. Apply one coat of mil-p-23377, ty 1, cl 1 or 3 and two top coats of mil-c-46168,color code 33538 per fed-std-595 to top of head.
Manufacturer part number 02331-1 for national stock number 5306013825999.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-382-5999.
-
MPN or Model
02331-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.485 inches -
Fastener Length
0.500 inches -
Head Style
Double hexagon extended washer -
Head Height
0.260 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.040 inches -
Hole Diameter
0.047 inches -
Thread Diameter
0.190 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Criticality Code Justification
Thsd -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-088-0543 MPN SRS305-520220Bell Crank
- 5305-01-219-9110 MPN 02071Thumbscrew
- 5306-00-006-1412 MPN CIPRD-MS27576-4-35RClose Tolerance Bolt
- 5306-01-425-5464 MPN LL-NU0-1760Threaded End Rod
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-382-5999 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
02331-1 | Defense Logistics Agency |