NSN 5306-01-385-9842
Close Tolerance Hex Head Bolt
Between 1.098 inches and 1.128 inches fastener length, flat countersunk head style, 0.3047 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number 03A160-3-12 for national stock number 5306013859842.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-385-9842.
-
MPN or Model
03A160-3-12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.098 inches and 1.128 inches -
Head Style
Flat countersunk -
Head Diameter
0.3047 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-01-026-5776 MPN VAL22034-7G28Shear Bolt
- 5306-01-054-6285 MPN C7521L6-24Shear Bolt
- 5306-01-206-2341 MPN VAL23033-7H30XShoulder Bolt
- 5306-01-209-9304 MPN VAL23033-7H27XShoulder Bolt
- 5306-01-406-2978 MPN VAL23033-6-20Shear Bolt
- 5306-01-435-6399 MPN VCG0038-10-26Shear Bolt
- 5306-01-513-0028 MPN BACB30UU6K23Close Tolerance Bolt
- 5305-00-151-8656 MPN GS551P4-621Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-385-9842 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A160-3-12 | Northrop Grumman Systems Corporation |
DF33006-3-12 | Huck International, Inc. |
AIC4409-3-12 | Sps Technologies, Llc |
DF33006-3-12 | Huck Intl Inc |
D3306-3-12 | Huck Intl Inc |
SLB218-3-12 | Space-lok, Inc. |
03A160-3-12 | Northrop Grumman Systems Corporation |
HR241-3-12 | Hi-shear Corporation |
VCL0007-3-12 | Valley-todeco, Inc. |
SC5057-3-12 | Arconic Global Fasteners & Rings, |
PBF1418-3-12 | Sps Technologies, Llc |
123740-3-12 | Sps Technologies, Llc |