NSN 5306-01-387-0530
Close Tolerance Hex Head Bolt
0.625 inches fastener length, double hexagon w/hole head style, 0.303 inches head height, width between flats: 0.312 inches .
Manufacturer part number MS9715-08 for national stock number 5306013870530.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-387-0530.
-
MPN or Model
MS9715-08
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.536 inches -
Fastener Length
0.625 inches -
Head Style
Double hexagon w/hole -
Head Height
0.303 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Hole Diameter
Between 0.060 inches and 0.070 inches -
Grip Diameter
Between 0.222 inches and 0.232 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.079 inches and 0.099 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Nickel alloy uns n07001 -
Material Specification
Ams 5707 assn standard single material response -
Precious Material And Location
silver -
Precious Material
Silver -
Surface Treatment
Silver -
Surface Treatment Specification
Ams 2410 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-006-5494 MPN RNC60H2432FMFilm Fixed Resistor
- 5935-00-060-2031 MPN MS3127E14-12PElectrical Receptacle Connector
- 5935-00-078-7250 MPN MS3106K28-2SCElectrical Plug Connector
- 5935-00-127-1454 MPN MS3111P8-4SWElectrical Plug Connector
- 5935-00-170-0142 MPN MS3471L12-8PElectrical Plug Connector
- 5935-00-185-5223 MPN MS27473E22A55SAElectrical Plug Connector
- 5950-00-309-7904 MPN MS75084-5Radio Frequency Coil
- 5935-00-498-5762 MPN MS3124F22-55PWElectrical Receptacle Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-387-0530 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9715-08 | Military Standards |