NSN 5306-01-390-2817
Coaxial Connector
Between 1.333 inches and 1.363 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21296-04013 for national stock number 5306013902817.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-390-2817.
-
MPN or Model
MS21296-04013
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.520 inches -
Fastener Length
Between 1.333 inches and 1.363 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.318 inches and 0.324 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837, ty ii, cl 2 military specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6526 MPN NAS1063A14-404Terminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-007-3025 MPN NAS1102C04-6PMachine Screw
- 5305-00-008-9114 MPN NAS1190E02T6LSocket Head Cap Screw
- 5305-00-040-9354 MPN NAS514P428-18PMachine Screw
- 5305-00-059-3669 MPN NAS1635-3-40Machine Screw
- 5305-00-065-5798 MPN NAS1154-13Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-390-2817 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-04013 | National Aerospace Standards |
MS21296-04013 | Military Standards |