NSN 5306-01-391-4386
Wheel Bolt
Between 16.050 inches and 16.950 inches fastener length, hexagon extended washer head style, 0.620 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number 8100-008 for national stock number 5306013914386.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-391-4386.
-
MPN or Model
8100-008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
Between 16.050 inches and 16.950 inches -
Head Style
Hexagon extended washer -
Head Height
0.620 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Extended Washer Diameter
Between 0.680 inches and 0.750 inches -
Extended Washer Thickness
0.462 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
9300 pounds per square inch -
Material
Steel -
Material Specification
Sae j429 gr 8 military specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-630-3770 MPN 1811Valve Cap
- 4820-01-314-4340 MPN 00255074Plug Cock
- 4820-01-081-5629 MPN 8153E-6HS2Selector Rotary Valve
- 4820-01-385-0455 MPN 10955261Linear Directional Control Valve Working Body Section
- 4820-01-386-8282 MPN C-400-B-0Check Valve
- 4820-01-408-4701 MPN 85563-06PDirectional Control Linear Valve
- 4820-01-443-1480 MPN CV101PCheck Valve
- 5306-01-203-2500 MPN 3128-001Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-391-4386 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8100-008 | Parker-hannifin Corporation |
8100-008 | Parker Hannifin Corporation |
8100-008 | Parker-hannifin Corporation |
8100-008 | Parker Hannifin Corporation |
8100-008 | Parker-hannifin Corporation |
8100-008 | Parker Hannifin Corporation |