NSN 5306-01-394-7872
Coaxial Connector
Cadmium fluoborate plating per nas 672.
Manufacturer part number EWSB22-9-A16 for national stock number 5306013947872.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-394-7872.
-
MPN or Model
EWSB22-9-A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.590 inches -
Fastener Length
Between 1.574 inches and 1.621 inches -
Head Style
Double hexagon -
Head Height
0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.562 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-078-9635 MPN SFT22-5-8Machine Screw
- 5305-00-316-7704 MPN 965812-203CMachine Screw
- 5305-00-332-7118 MPN 56462V428H10Socket Head Cap Screw
- 5305-00-364-9543 MPN HT4025L3-6Close Tolerance Screw
- 5305-00-440-9983 MPN SFT22-4A27Close Tolerance Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-764-3021 MPN 54266-4-10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-394-7872 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-9-A16 | Sps Technologies, Llc |