NSN 5306-01-395-6538
Coaxial Connector
Between 0.933 inches and 0.963 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6303-U10 for national stock number 5306013956538.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-395-6538.
-
MPN or Model
NAS6303-U10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.933 inches and 0.963 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Thread Series Designator
Unjf -
Specification Data
80205-nas6303 professional/industrial association standard
More from these suppliers
- 5935-01-605-9682 MPN NAS1641R12T12Electrical Receptacle Connector
- 5935-01-613-0211 MPN MS31081R-22-10SElectrical Plug Connector
- 5305-00-057-0513 MPN MS51958-16Machine Screw
- 5305-00-057-0524 MPN MS51958-28Machine Screw
- 5305-00-087-9651 MPN MS24678-26CSocket Head Cap Screw
- 5305-00-142-5048 MPN NAS1156V8Close Tolerance Screw
- 5305-00-150-3370 MPN MS51976-72Setscrew
- 5305-00-174-8685 MPN NAS1216-08E24Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-395-6538 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303-U10 | National Aerospace Standards |
Stock Check
- NS: 711
- NE: 8968
- SV: 13